(Copied from: http://ubuntuforums.org/showthread.php?p=11207489)
Hey anybody own this model? This is not the GT with a nvidia graphics card. My current status:
Wireless (out of box) [Slows down and then causes kernel panic] Suspend (out of box) Audio (kernel 3 + manual fix) Graphics (kernel 3 + edgers xorg) Brightness (acpi option in boot) Battery life - around 5 hours CPU Scaling (out of box) External monitor setup - manual editing
Note: I upgraded to the xorg edgers kernel version and froze it at 3.0.0-8 because everything is working. Maybe some bugs are fixed in later versions.
Upgrade to kernel 3 to receive the patch for audio. Headphone jack sense not working. I manually disable the speakers with hda-verb /dev/snd/hwC0D0 0x1f SET_PIN_WIDGET_CONTROL 0
Microphone does not work unless you use hda analyzer and set Node[0x23] PIN Val and Val to different values (i like 2,3)
Use xorg edgers, which contains a kernel 3.0 upgrade. Install kernel, new xorg, and forced a stuck package to upgrade. This makes graphics pretty snappy (I can now use blur in compiz)
Not sure, this might have worked out of box. If not try adding acpi_osi=Linux to your boot options (edit in file /etc/default/grub the line containing GRUB_CMDLINE_LINUX_DEFAULT to GRUB_CMDLINE_LINUX_DEFAULT=“quiet splash acpi_backlight=vendor” …then run sudo update-grub)
With powertop I noticed that lots of interrupts were being generated from the card reader. Disable the card reader: sudo rmmod rts_pstor.
I have a large monitor that should be the only one on when it is plugged in. I ended up setting both my ~/.config/monitors.xml and also /etc/gnome-settings-daemon/xrandr/monitors.xml to:
<monitors version="1"> <configuration> <clone>no</clone> <output name="LVDS1"> <vendor>INL</vendor> <product>0x0017</product> <serial>0x00000000</serial> </output> <output name="VGA1"> </output> <output name="HDMI1"> <vendor>VSC</vendor> <product>0xe226</product> <serial>0x01010101</serial> <width>1920</width> <height>1080</height> <rate>60</rate> <x>0</x> <y>0</y> <rotation>normal</rotation> <reflect_x>no</reflect_x> <reflect_y>no</reflect_y> <primary>no</primary> </output> <output name="DP1"> </output> </configuration> </monitors>
The best way is to have both monitors on with the gnome-monitor-properties tool, and save the configuration. Then go in and delete everything except for [vendor, product, serial] for the monitor you want to keep off.
Hope this helps, I'll try to keep this thread updated if anyone finds something cool/mistakes.
Mesin digital printing
Mesin printing digital
Mesin cutting sticker
Mesin fiber laser
Mesin cutting laser
Mesin laser cutting
Informasi mesin advertising
Mesin digital printing outdoor
Mesin digital printing indoor
Supplyer mesin digital printing
Usaha digital printing
Mesin digital print
Alat digital print