This is a guide to running Linux with the IBM-Lenovo Thinkpad R50p laptop.
This guide is intended to provide you details on how well this laptop works with Linux and which modules you need to configure. For details on how to actually install and configure the required modules have a look at our guides section for distribution specific instructions.
If you would like to edit this page please first view our Editing Guidelines.
|Name||IBM-Lenovo Thinkpad R50p|
|Processor||Intel Pentium-M 1.7GHz|
|Graphics||ATI Mobility FireGL T2|
|Network||10/100/1000 Ethernet, IBM 802.11g Wireless, Bluetooth|
|Other||2 x USB2.0, 1 x Firewire|
|Sound||Yes||Use the snd-intel8x0 module|
|Wireless||Yes||Use the Madwifi module|
|56K Modem||Not Tested|
For the graphics chip you can use either the open source radeon module or ATI's proprietary fglrx module. For installation instructions, you can view our Configuring an ATI graphics chip guide. For 3D support, you will need the proprietary module.
There were no problems in getting this laptop working when used with an up to date Linux distribution. It is recommended to use a Linux distribution with kernel version 2.6.16 or greater, such as Fedora Core 5 or Ubuntu 6.06.