EditHistoryPrint

Fujitsu Lifebook E8010

Created by: Bill Giannikos,Last modification on Wed 15 of Aug, 2007 [08:06 UTC]by Bill Giannikos


This guide is intended to provide you details on how well this laptop works with Linux and which drivers you need to configure. For details on how to actually install and configure the required drivers have a look at our guides section for distribution specific instructions.








Introduction

This is a guide to running Linux with the Fujitsu Lifebook E8010 laptop.

Editing This Page

View our Editing Guidelines

Specifications

ProcessorIntel Pentium-M 745 1.8GHz
Screen15" SXGA+
RAM1GB
HDD80GB
Optical DriveDVD+-RW
GraphicsATI Mobility Radeon 9700
Network10/100/1000 Ethernet, Intel 2200 802.11g Wireless
Other4 x USB2.0, 1 x Firewire

Linux Compatibility

DeviceCompatibilityComments
ProcessorYes
ScreenYes
HDDYes
Optical DriveYes
GraphicsYes
SoundYesUse the snd-intel8x0 driver
EthernetYes
WirelessYesUse the ipw2200 driver
56K ModemNot Tested
USBYes
FirewireNot Tested
SD Card ReaderNot Tested
PCMCIANot Tested

Notes

For the graphics chip you can use either the open source radeon driver or ATI's proprietary fglrx driver. For installation instructions, you can view our Configuring an ATI graphics chip guide. For 3D support, you will need the proprietary driver.

Related Resources

Preparing your laptop for Linux
Configuring an ATI graphics chip
Increasing battery life

Summary

There were no problems in getting this laptop working when used with an up to date Linux distribution. It is recommended to use a Linux distribution with kernel version 2.6.16 or greater, such as Fedora Core 5 or Ubuntu 6.06.


Have you installed Linux on this laptop? If so how about leaving a comment about your success in the comments section below.



Comments


Contact Us Advertise with Us Sister Sites Privacy Policy Terms of Use

Copyright © 2006-2008 Linlap.com