EditHistoryPrint

Hewlett-Packard nw8240

Created by: Bill Giannikos,Last modification on Thu 16 of Aug, 2007 [07:56 UTC]by Bill Giannikos


This guide is intended to provide you details on how well this laptop works with Linux and which drivers you need to configure. For details on how to actually install and configure the required drivers have a look at our guides section for distribution specific instructions.






If you are looking to purchase this laptop you can visit HP's notebook page.

Authors

Bill Giannikos (bill2 at giannikos.com.au)

Introduction

This is a guide to running Linux with the Hewlett-Packard nw8240 laptop, model EJ876PA.

Editing This Page

View our Editing Guidelines

Specifications

ProcessorIntel Pentium-M 770 2.13Ghz
Screen15.4"
RAM1024MB
HDD80GB
Optical DriveDVD+-RW
Graphics128MB ATI Mobility FireGL V5000
Network10/100/1000 Ethernet, Intel 2915 802.11g Wireless, Bluetooth
Other3 x USB2.0, 1 x Firewire

Linux Compatibility

DeviceCompatibilityComments
ProcessorYes
ScreenYes
Optical DriveYes
GraphicsYes
SoundYesUse snd-intel8x0 driver
EthernetYesUse tg3 driver
WirelessYesUse ipw2200 driver
BluetoothNot tested
56K ModemYesUse slmodem driver
USBYes
FirewireNot tested
SD Card ReaderNot tested, probably wont work
PCMCIANot tested

Notes

This notebook supports both the open source radeon driver and the proprietary ATI driver. The proprietary driver would probably give you the best 3D performance.

Related Resources

Preparing your laptop for Linux
Configuring an ATI graphics chip
Increasing battery life

Summary

The were no problems in getting this laptop working well with Linux, it should work with most recent Linux distributions.


Have you installed Linux on this laptop? If so how about leaving a comment about your success in the comments section below.



Comments


Contact Us Advertise with Us Sister Sites Privacy Policy Terms of Use

Copyright © 2006-2008 Linlap.com