Fujitsu Lifebook T4410

I tried the Ethernet Connection with openSuSE 11.2 It works fine using the “tg3” module for Broadcom Adapters.

Hi,

I am trying to get the multitouch screen with dual digitizer to work on the T4410. The linuxwacom drivers recognize the active digitizer, but not the passive capacitive touch screen. It is a serial device connected to /dev/ttyS0 and xxd /dev/ttyS0 shows activity for both the active and passive digitizer events. But in the Xorg.0.log I get:

(**) Option "Device" "/dev/ttyS0"
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/ttyS0
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) /dev/ttyS0: Tablet PC buttons are on 
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
(WW) usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (38400) maxX=26312 maxY=16520 maxZ=255 resX=2540 resY=2540  tilt=disabled
(**) Option "Device" "/dev/ttyS0"
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/ttyS0
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) eraser: threshold = 15
(**) eraser: max x set to 26312 
(**) eraser: max y set to 16520 
(**) eraser: max z = 255
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(**) Option "Device" "/dev/ttyS0"
(EE) PreInit returned NULL for "cursor"
(**) Option "Device" "/dev/ttyS0"
(EE) PreInit returned NULL for "touch"

My xorg.conf reads:

 Section "Module"
  Load "intel"
  Load "wacom"
EndSection
Section "Device"
        Identifier      "Builtin Default intel Device 0"
        Driver  "intel"
EndSection
Section "Screen"
        Identifier      "Builtin Default intel Screen 0"
        Device  "Builtin Default intel Device 0"
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/ttyS0"          # SERIAL ONLY
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Serial Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/ttyS0"          # SERIAL ONLY
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Serial Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/ttyS0"          # SERIAL ONLY
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Serial Tablet PC ONLY
EndSection

# This section is for Intuos3, CintiqV5, Graphire4, or Bamboo
#Section "InputDevice"
#  Driver        "wacom"
#  Identifier    "pad"
#  Option        "Device"        "/dev/ttyS0"          # SERIAL ONLY
#  Option        "Type"          "pad"
#EndSection

# This section is for the TabletPC that supports touch
Section "InputDevice"
  Driver        "wacom"
  Identifier    "touch"
  Option        "Device"        "/dev/ttyS0"          # SERIAL ONLY
  Option        "Type"          "touch"
  Option        "ForceDevice"   "ISDV4"               # Serial Tablet PC ONLY
EndSection

Section "ServerLayout"
        Identifier      "Builtin Default Layout"
        Screen  "Builtin Default intel Screen 0"
        InputDevice "stylus" "SendCoreEvents"
        InputDevice "eraser" "SendCoreEvents"
        InputDevice "cursor" "SendCoreEvents"
        InputDevice "touch" "SendCoreEvents"
EndSection