Installation of Kubuntu 10.04 using usb-pen drive. Almost all hardware works OOTB. Mic, Speaker, webcam all supported. Except Mic on/off all hotkeys work OOTB. Suspend/Resume to disk/ram works.
Pluging earphones on the output jack doesn't make anything. Internal speakers continue to play… Perhaps the mic&earphone jack need an adapter for use with standard earphones.
This page is just for discussing using Linux on the Lenovo ThinkPad Edge 13 - AMD. For a general discussion about this laptop you can visit the Lenovo ThinkPad Edge 13 - AMD page on LapWik.
Hi, Linux 3.2 rc1 and the following fixed the suspending problem on this model. But rc3 cause problem for internal cam. For those who enjoys bleeding edge, please try newer than 3.2-rc4
And about speaker or earphone problem, it's said due to the driver mess up with channel mapping. Add some option into alsa.conf seems to solve the problem. Try google around something like “edge hda intel olpc linux” should do.
rt, Thursday 10 of November, 2011 [07:47:07]
I got some problem about suspending with Kernel 3.1.0. Kernel 3.0.7 with KMS framebuffer working well for me. I use the very same configuration from 3.0.7.
Unfortunately, 3.1.0 kernel CANNOT suspend properly. The CPU remains working while monitor is turned off. Does anyone experience this?
msx, Monday 22 of November, 2010 [19:56:13]
Thank you! I'm looking upon this machine and I'm happy it works great!
Search
Sister Sites Lination - Blogging site for Linux users LinWik - Linux guides in wiki format
Discussion
Hi, Linux 3.2 rc1 and the following fixed the suspending problem on this model. But rc3 cause problem for internal cam. For those who enjoys bleeding edge, please try newer than 3.2-rc4
And about speaker or earphone problem, it's said due to the driver mess up with channel mapping. Add some option into alsa.conf seems to solve the problem.
Try google around something like “edge hda intel olpc linux” should do.
I got some problem about suspending with Kernel 3.1.0.
Kernel 3.0.7 with KMS framebuffer working well for me.
I use the very same configuration from 3.0.7.
Unfortunately, 3.1.0 kernel CANNOT suspend properly. The CPU remains working while monitor is turned off.
Does anyone experience this?
Thank you! I'm looking upon this machine and I'm happy it works great!