This is a template for a future guide to running Linux with the Toshiba Qosmio G50-G55 laptop. If you have the Toshiba Qosmio G50-G55 and are running Linux on it please consider editing this page or adding a comment below with your compatibility details. By contributing you will help other people running this laptop or trying to make a decision on whether to buy it or not.
This guide is intended to provide you details on how well this laptop works with Linux and which modules you need to configure. For details on how to actually install and configure the required modules have a look at our guides section for distribution specific instructions.
Bluetooth works only after a reboot (NOT a power cycle) from Windows. Probably it needs a firmware upload. Tested omnibook kernel module with no luck. toshset doesn't work either.
NdK, Thursday 14 of May, 2009 [08:45:48]
Using a G50-12Q with Mandriva 2009.1 . Works really well, except for some multimedia buttons (play, stop, rew, ffwd and volume control wheel are OK, “player”, mute, light, photo and dolby does not generate events). Updated “fingerprint reader” part: works like other swipe sensors (sometimes you'll have an hard time making it recognize your print). Updated the wireless part: works (at least on an unprotected AP).
Haque, Wednesday 31 of December, 2008 [20:43:03]
Hi everyone, I just created that Wikiarticle and I hope it can help someone. A Happy new year to all linux fans ;)
Search
Sister Sites Lination - Blogging site for Linux users LinWik - Linux guides in wiki format
Discussion
Bluetooth works only after a reboot (NOT a power cycle) from Windows. Probably it needs a firmware upload.
Tested omnibook kernel module with no luck. toshset doesn't work either.
Using a G50-12Q with Mandriva 2009.1 .
Works really well, except for some multimedia buttons (play, stop, rew, ffwd and volume control wheel are OK, “player”, mute, light, photo and dolby does not generate events).
Updated “fingerprint reader” part: works like other swipe sensors (sometimes you'll have an hard time making it recognize your print).
Updated the wireless part: works (at least on an unprotected AP).
Hi everyone, I just created that Wikiarticle and I hope it can help someone.
A Happy new year to all linux fans ;)