View more guides at Linux Wiki Guides
This is a compatibiltiy guide to running Linux with the Asus B53J laptop.
This page is just for discussing using Linux on the Asus B53J. For a general discussion about this laptop you can visit the Asus B53J page on LapWik.
If you would like to edit this page please first view our Editing Guidelines.
For full specifications see the Asus B53J specifications page.
|Processor||Intel® Core™ i7 620M Processor
Intel® Core™ i5 430M/520M/540M Processor
Intel® Core™ i3 350M Processor
|Screen||15.6“ (1366×768) Widescreen|
|RAM||Up to 8GB|
|HDD||up to 640GB|
|Graphics||ATI Mobility™ Radeon® HD5470|
|HDD||Works||Replaced factory 320GB with 1TB Seagate and works perfectly|
|Graphics||Works||With the ATI proprietary drivers and opensource|
|ExpressCard Slot||Not Tested|
|Fingerprint Reader||Works||Detected with Fingerprint GUI, fprint-demo, and pam fprint using Libfprint 0.5.1|
|Webcam||Works||Tested with Cheese software & Skype|
I used Ubuntu 11.04 64bit
I used Slackware 14.1
You can enter a summary of how well the Asus B53J works with Linux here.
I was able to successfully test everything but the modem (probably either a Winmodem or Linmodem) and the Expresscard slot, the latter of which only because I don't have a card for it, even though it almost certainly will work with one.
To use the opensource drivers for Xorg and get the most out of the ATI video card, be sure that your kernel is properly configured and using the correct firmware (all the “Cedar_*.bin” firmware and “CYPRESS_uvd.bin”).
Also, be sure to use the ”–with-drivers=all“ flag with configure when building libfprint to detect the fingerprint reader.
Scott A. Conway