Samsung Galaxy Book 12" tablet (SM-W728YZKATEL)

Introduction

This is a template for a future compatibility guide to running Linux with the Samsung Galaxy Book 12“ 256GB LTE (SM-W728YZKATEL) tablet. If you have this device and are running Linux on it please consider editing this page or adding a comment below with your compatibility details. By contributing you will help other people running this tablet or trying to make a decision on whether to buy it or not.

Editing This Page

If you would like to edit this page please first view our Editing Guidelines.

Specifications

For full specifications see the specifications page.

Linux Compatibility

DeviceCompatibilityComments
ProcessorYes
ScreenPartialBrightness controls do not work
HDDYesStandard AHCI SSD
Graphics ChipYes
VGA OutN/A
HDMI OutYESHDMI out works through a dongle
Display PortN/A
Sound No
MicrophoneNo
Headphone PortNo
Microphone-In PortN/A
EthernetN/A
WirelessNo
LTENo
BluetoothWorks works out of the box
USBWorksFresh Install achieved with flash drive and type c adapter.
FirewireN/A
Card ReaderN/A
WebcamNoNo device detected via apps
KeyboardWorksSystem detects as hardwire keyboard (use F keys for boot options)
TouchPadWorks
Suspend/ResumePartialWorks properly if power settings are set to “Don't suspend/do nothing”
SensorsNo

Notes

BIOS, bootloader and recovery

F2 during boot to enter UEFI, disable secure boot and enable CSM to boot UEFI flash drives.
The bios reports itself as Aptio Setup Utility by AMI.

It supports UEFI as well as CSM, but it does appear to let you choose a boot device in UEFI mode - only detected EFI loaders are listed and so far, Any linux or efi flash drive appears.

Secure boot can be toggled on and off. When off and in CSM mode, it boots Linux fine though, a Debian 9 live iso written to a flash drive works out of the box.

It seems that the device does behave like a standard PC and not an Android tablet. The BIOS does not seem to live on the harddisk itself. That being said, it's strongly recommended to either leave the windows recovery partitions intact, or make a 1:1 dump of the contents of the drive since there appears to be no recovery media other than what is preinstalled on that drive.

lspci

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 02)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 620 (rev 02)
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 02)
00:05.0 Multimedia controller: Intel Corporation Skylake Imaging Unit (rev 01)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:14.3 Multimedia controller: Intel Corporation Device 9d32 (rev 01)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)
00:15.2 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #2 (rev 21)
00:15.3 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #3 (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:19.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO UART Controller #2 (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO UART Controller #0 (rev 21)
00:1e.6 SD Host controller: Intel Corporation Sunrise Point-LP Secure Digital IO Controller (rev 21)
00:1f.0 ISA bridge: Intel Corporation Device 9d4e (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Multimedia audio controller: Intel Corporation Device 9d71 (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32) <-- USB TP-Link TL-WN722N I'm using for wifi atm.

dmesg

This is on a Pop!_OS 17.10 install:

[    0.000000] microcode: microcode updated early to revision 0x80, date = 2018-01-04
[    0.000000] Linux version 4.15.0-041500rc9-generic (kernel@tangerine) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #201801212130 SMP Mon Jan 22 02:31:37 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-041500rc9-generic root=UUID=5c83ecfb-10d7-4100-aafc-f2ce936f6c1f ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000828c1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000828c2000-0x00000000828c2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000828c3000-0x0000000082977fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000082978000-0x0000000082978fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000082979000-0x000000008a61bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000008a61c000-0x000000008ba35fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008ba36000-0x000000008ba71fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008ba72000-0x000000008bb09fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008bb0a000-0x000000008bf11fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008bf12000-0x000000008bffdfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000008bffe000-0x000000008bffefff] usable
[    0.000000] BIOS-e820: [mem 0x000000008bfff000-0x000000008f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026f7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x8ba42000  ACPI=0x8ba42000  SMBIOS=0x8be6f000  SMBIOS 3.0=0x8be6e000  ESRT=0x89322098  MEMATTR=0x8770a018 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. Galaxy Book 12 LTE/SM-W728YZKATEL, BIOS P02HAC.004.170626.WY.1442 06/26/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x26f800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.000000]   3 base 008E000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 008D000000 mask 7FFF000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x8bfff max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x0000000089322098 to 0x00000000893220d0.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x26e93a000, 0x26e93afff] PGTABLE
[    0.000000] BRK [0x26e93b000, 0x26e93bfff] PGTABLE
[    0.000000] BRK [0x26e93c000, 0x26e93cfff] PGTABLE
[    0.000000] BRK [0x26e93d000, 0x26e93dfff] PGTABLE
[    0.000000] BRK [0x26e93e000, 0x26e93efff] PGTABLE
[    0.000000] BRK [0x26e93f000, 0x26e93ffff] PGTABLE
[    0.000000] BRK [0x26e940000, 0x26e940fff] PGTABLE
[    0.000000] BRK [0x26e941000, 0x26e941fff] PGTABLE
[    0.000000] BRK [0x26e942000, 0x26e942fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x31a65000-0x34d29fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000008BA42000 000024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 0x000000008BA420B8 0000EC (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000008BA60E00 000114 (v06 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000008BA42230 01EBD0 (v02 SECCSD LH43STAR 01072009 INTL 20160422)
[    0.000000] ACPI: FACS 0x000000008BB09E80 000040
[    0.000000] ACPI: APIC 0x000000008BA60F18 000084 (v03 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000008BA60FA0 000044 (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000008BA60FE8 0000B0 (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000008BA61098 00003C (v01 SECCSD LH43STAR 01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000008BA610D8 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000008BA61438 00B113 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[    0.000000] ACPI: MSDM 0x000000008BA6C550 000055 (v03 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000008BA6C5A8 00325A (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: HPET 0x000000008BA6F808 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000008BA6F840 000024 (v02 INTEL  RVP7Rtd3 00001000 INTL 20160422)
[    0.000000] ACPI: UEFI 0x000000008BA6F868 000042 (v01 SECCSD LH43STAR 00000002      01000013)
[    0.000000] ACPI: SSDT 0x000000008BA6F8B0 000EE4 (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: LPIT 0x000000008BA70798 000094 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000008BA70830 000141 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000008BA70978 00050D (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x000000008BA70E88 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000008BA70EC0 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: SLIC 0x000000008BA70F18 000176 (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: DMAR 0x000000008BA71090 000180 (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.000000] ACPI: NHLT 0x000000008BA71210 00002D (v00 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: BGRT 0x000000008BA71240 000038 (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: TPM2 0x000000008BA71278 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.000000] ACPI: SSDT 0x000000008BA712B0 0000B1 (v01 Intel_ ADebTabl 00001000 INTL 20160422)
[    0.000000] ACPI: WSMT 0x000000008BA71368 000028 (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000026f7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x26f7d5000-0x26f7fffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026f7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000828c1fff]
[    0.000000]   node   0: [mem 0x00000000828c3000-0x0000000082977fff]
[    0.000000]   node   0: [mem 0x0000000082979000-0x000000008a61bfff]
[    0.000000]   node   0: [mem 0x000000008bffe000-0x000000008bffefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000026f7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026f7fffff]
[    0.000000] On node 0 totalpages: 2071991
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 23 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8793 pages used for memmap
[    0.000000]   DMA32 zone: 562715 pages, LIFO batch:31
[    0.000000]   Normal zone: 23520 pages used for memmap
[    0.000000]   Normal zone: 1505280 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] Reserving Intel graphics memory at 0x000000008d800000-0x000000008f7fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x828c2000-0x828c2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x82978000-0x82978fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8a61c000-0x8ba35fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ba36000-0x8ba71fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ba72000-0x8bb09fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8bb0a000-0x8bf11fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8bf12000-0x8bffdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8bfff000-0x8f7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x8f800000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x8f800000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2039591
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-041500rc9-generic root=UUID=5c83ecfb-10d7-4100-aafc-f2ce936f6c1f ro quiet splash vt.handoff=7
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7978356K/8287964K available (12300K kernel code, 2469K rwdata, 4192K rodata, 2388K init, 2416K bss, 309608K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39020 entries in 153 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.004000] APIC: Switch to symmetric I/O mode setup
[    0.004000] DMAR: Host address width 39
[    0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.004000] DMAR: RMRR base: 0x0000008ad55000 end: 0x0000008ad74fff
[    0.004000] DMAR: RMRR base: 0x0000008d000000 end: 0x0000008f7fffff
[    0.004000] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.004000] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.004000] DMAR: ANDD device: 3 name: \_SB.PCI0.I2C2
[    0.004000] DMAR: ANDD device: 4 name: \_SB.PCI0.I2C3
[    0.004000] DMAR: ANDD device: 9 name: \_SB.PCI0.UA00
[    0.004000] DMAR: ANDD device: b name: \_SB.PCI0.UA02
[    0.004000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.004000] x2apic enabled
[    0.004000] Switched APIC routing to cluster x2apic.
[    0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.028000] tsc: Detected 2700.000 MHz processor
[    0.028000] tsc: Detected 2712.000 MHz TSC
[    0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.00 BogoMIPS (lpj=10848000)
[    0.028000] pid_max: default: 32768 minimum: 301
[    0.028000] Security Framework initialized
[    0.028000] Yama: becoming mindful.
[    0.028000] AppArmor: AppArmor initialized
[    0.028000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.028000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.028000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028000] CPU: Physical Processor ID: 0
[    0.028000] CPU: Processor Core ID: 0
[    0.028000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028000] mce: CPU supports 8 MCE banks
[    0.028000] CPU0: Thermal monitoring enabled (TM1)
[    0.028000] process: using mwait in idle threads
[    0.028000] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.028000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.028000] Spectre V2 mitigation: Vulnerable: Minimal generic ASM retpoline
[    0.028000] Spectre V2 mitigation: Filling RSB on context switch
[    0.028000] Freeing SMP alternatives memory: 36K
[    0.032888] TSC deadline timer enabled
[    0.032893] smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[    0.032950] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.032981] ... version:                4
[    0.032982] ... bit width:              48
[    0.032982] ... generic registers:      4
[    0.032983] ... value mask:             0000ffffffffffff
[    0.032983] ... max period:             00007fffffffffff
[    0.032984] ... fixed-purpose events:   3
[    0.032984] ... event mask:             000000070000000f
[    0.033019] Hierarchical SRCU implementation.
[    0.033997] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.034009] smp: Bringing up secondary CPUs ...
[    0.034070] x86: Booting SMP configuration:
[    0.034071] .... node  #0, CPUs:      #1 #2 #3
[    0.037787] smp: Brought up 1 node, 4 CPUs
[    0.037787] smpboot: Max logical packages: 1
[    0.037787] smpboot: Total of 4 processors activated (21696.00 BogoMIPS)
[    0.040343] devtmpfs: initialized
[    0.040343] x86/mm: Memory block size: 128MB
[    0.040664] evm: security.selinux
[    0.040665] evm: security.SMACK64
[    0.040665] evm: security.SMACK64EXEC
[    0.040666] evm: security.SMACK64TRANSMUTE
[    0.040666] evm: security.SMACK64MMAP
[    0.040666] evm: security.apparmor
[    0.040667] evm: security.ima
[    0.040667] evm: security.capability
[    0.040680] PM: Registering ACPI NVS region [mem 0x828c2000-0x828c2fff] (4096 bytes)
[    0.040680] PM: Registering ACPI NVS region [mem 0x8ba72000-0x8bb09fff] (622592 bytes)
[    0.040680] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040680] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.040680] pinctrl core: initialized pinctrl subsystem
[    0.040680] RTC time:  2:31:04, date: 01/23/18
[    0.040680] NET: Registered protocol family 16
[    0.040680] audit: initializing netlink subsys (disabled)
[    0.040680] audit: type=2000 audit(1516674664.040:1): state=initialized audit_enabled=0 res=1
[    0.040680] cpuidle: using governor ladder
[    0.040680] cpuidle: using governor menu
[    0.040680] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.040680] ACPI: bus type PCI registered
[    0.040680] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040680] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.040680] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.040680] PCI: Using configuration type 1 for base access
[    0.041049] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.041049] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.041049] ACPI: Added _OSI(Module Device)
[    0.041049] ACPI: Added _OSI(Processor Device)
[    0.041049] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.041049] ACPI: Added _OSI(Processor Aggregator Device)
[    0.044469] ACPI: Executed 26 blocks of module-level executable AML code
[    0.060539] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.096722] ACPI: Dynamic OEM Table Load:
[    0.096729] ACPI: SSDT 0xFFFF89EF23735800 0006B4 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.096954] ACPI: Executed 1 blocks of module-level executable AML code
[    0.097058] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.098862] ACPI: Dynamic OEM Table Load:
[    0.098867] ACPI: SSDT 0xFFFF89EF23086C00 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.099065] ACPI: Executed 1 blocks of module-level executable AML code
[    0.099268] ACPI: Dynamic OEM Table Load:
[    0.099272] ACPI: SSDT 0xFFFF89EF2315D800 000115 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.099433] ACPI: Executed 1 blocks of module-level executable AML code
[    0.099532] ACPI: Dynamic OEM Table Load:
[    0.099536] ACPI: SSDT 0xFFFF89EF2315CE00 0001A4 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.099689] ACPI: Executed 1 blocks of module-level executable AML code
[    0.100215] ACPI: Dynamic OEM Table Load:
[    0.100221] ACPI: SSDT 0xFFFF89EF23730800 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.100768] ACPI: Executed 1 blocks of module-level executable AML code
[    0.100958] ACPI: Dynamic OEM Table Load:
[    0.100962] ACPI: SSDT 0xFFFF89EF2315D600 000197 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.101164] ACPI: Executed 1 blocks of module-level executable AML code
[    0.101360] ACPI: Dynamic OEM Table Load:
[    0.101365] ACPI: SSDT 0xFFFF89EF2315C200 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.101564] ACPI: Executed 1 blocks of module-level executable AML code
[    0.103921] ACPI: EC: EC started
[    0.103922] ACPI: EC: interrupt blocked
[    0.106918] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[    0.106919] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x36, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.106921] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
[    0.106921] ACPI: Interpreter enabled
[    0.106983] ACPI: (supports S0 S3 S4 S5)
[    0.106984] ACPI: Using IOAPIC for interrupt routing
[    0.107030] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.108335] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.145160] ACPI: Power Resource [FN00] (off)
[    0.145247] ACPI: Power Resource [FN01] (off)
[    0.146592] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.146597] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.148739] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.148740] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.149707] PCI host bridge to bus 0000:00
[    0.149712] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.149713] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.149714] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.149715] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.149716] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.149716] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.149717] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.149718] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.149719] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.149720] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.149721] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.149721] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.149722] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.149723] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.149724] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.149725] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.149726] pci_bus 0000:00: root bus resource [mem 0x8f800000-0xdfffffff window]
[    0.149727] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.149728] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.149738] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[    0.150506] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[    0.150518] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[    0.150524] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.150528] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.150544] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.150724] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.150737] pci 0000:00:04.0: reg 0x10: [mem 0xdf630000-0xdf637fff 64bit]
[    0.150955] pci 0000:00:05.0: [8086:1919] type 00 class 0x048000
[    0.150966] pci 0000:00:05.0: reg 0x10: [mem 0xdf000000-0xdf3fffff 64bit]
[    0.151184] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.151208] pci 0000:00:14.0: reg 0x10: [mem 0xdf620000-0xdf62ffff 64bit]
[    0.151282] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.151820] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.151844] pci 0000:00:14.2: reg 0x10: [mem 0xdf64d000-0xdf64dfff 64bit]
[    0.152087] pci 0000:00:14.3: [8086:9d32] type 00 class 0x048000
[    0.152199] pci 0000:00:14.3: reg 0x10: [mem 0xdf610000-0xdf61ffff 64bit]
[    0.152769] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.153032] pci 0000:00:15.0: reg 0x10: [mem 0xdf64c000-0xdf64cfff 64bit]
[    0.154058] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.154321] pci 0000:00:15.1: reg 0x10: [mem 0xdf64b000-0xdf64bfff 64bit]
[    0.155345] pci 0000:00:15.2: [8086:9d62] type 00 class 0x118000
[    0.155609] pci 0000:00:15.2: reg 0x10: [mem 0xdf64a000-0xdf64afff 64bit]
[    0.156633] pci 0000:00:15.3: [8086:9d63] type 00 class 0x118000
[    0.156896] pci 0000:00:15.3: reg 0x10: [mem 0xdf649000-0xdf649fff 64bit]
[    0.157853] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.157881] pci 0000:00:16.0: reg 0x10: [mem 0xdf648000-0xdf648fff 64bit]
[    0.157962] pci 0000:00:16.0: PME# supported from D3hot
[    0.158188] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.158207] pci 0000:00:17.0: reg 0x10: [mem 0xdf640000-0xdf641fff]
[    0.158215] pci 0000:00:17.0: reg 0x14: [mem 0xdf647000-0xdf6470ff]
[    0.158223] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.158231] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.158238] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.158246] pci 0000:00:17.0: reg 0x24: [mem 0xdf646000-0xdf6467ff]
[    0.158294] pci 0000:00:17.0: PME# supported from D3hot
[    0.158568] pci 0000:00:19.0: [8086:9d66] type 00 class 0x118000
[    0.158832] pci 0000:00:19.0: reg 0x10: [mem 0xdf645000-0xdf645fff 64bit]
[    0.159796] pci 0000:00:1c.0: [8086:9d12] type 01 class 0x060400
[    0.159887] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.160242] pci 0000:00:1e.0: [8086:9d27] type 00 class 0x118000
[    0.160505] pci 0000:00:1e.0: reg 0x10: [mem 0xdf644000-0xdf644fff 64bit]
[    0.161462] pci 0000:00:1e.6: [8086:9d2d] type 00 class 0x080501
[    0.161485] pci 0000:00:1e.6: reg 0x10: [mem 0xdf643000-0xdf643fff 64bit]
[    0.161739] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[    0.162036] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.162050] pci 0000:00:1f.2: reg 0x10: [mem 0xdf63c000-0xdf63ffff]
[    0.162277] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040100
[    0.162304] pci 0000:00:1f.3: reg 0x10: [mem 0xdf638000-0xdf63bfff 64bit]
[    0.162330] pci 0000:00:1f.3: reg 0x20: [mem 0xdf600000-0xdf60ffff 64bit]
[    0.162384] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.163055] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.163116] pci 0000:00:1f.4: reg 0x10: [mem 0xdf642000-0xdf6420ff 64bit]
[    0.163187] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.163765] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
[    0.168109] pci 0000:01:00.0: reg 0x10: [mem 0xdf400000-0xdf5fffff 64bit]
[    0.169310] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.180280] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.180285] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf5fffff]
[    0.187878] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.187961] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.187961] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.187961] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.187961] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.187961] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.187961] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.187961] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.188002] ACPI: EC: interrupt unblocked
[    0.188002] ACPI: EC: event unblocked
[    0.188002] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x36, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.188002] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
[    0.188021] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.188021] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.188021] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.188021] vgaarb: loaded
[    0.188176] SCSI subsystem initialized
[    0.188185] libata version 3.00 loaded.
[    0.188185] ACPI: bus type USB registered
[    0.188185] usbcore: registered new interface driver usbfs
[    0.188185] usbcore: registered new interface driver hub
[    0.188185] usbcore: registered new device driver usb
[    0.188185] EDAC MC: Ver: 3.0.0
[    0.188409] Registered efivars operations
[    0.230403] PCI: Using ACPI for IRQ routing
[    0.259337] PCI: pci_cache_line_size set to 64 bytes
[    0.259875] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.259876] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.259877] e820: reserve RAM buffer [mem 0x828c2000-0x83ffffff]
[    0.259878] e820: reserve RAM buffer [mem 0x82978000-0x83ffffff]
[    0.259879] e820: reserve RAM buffer [mem 0x8a61c000-0x8bffffff]
[    0.259880] e820: reserve RAM buffer [mem 0x8bfff000-0x8bffffff]
[    0.259880] e820: reserve RAM buffer [mem 0x26f800000-0x26fffffff]
[    0.259974] NetLabel: Initializing
[    0.259974] NetLabel:  domain hash size = 128
[    0.259975] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.259988] NetLabel:  unlabeled traffic allowed by default
[    0.260143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.260147] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.262203] clocksource: Switched to clocksource hpet
[    0.270025] VFS: Disk quotas dquot_6.6.0
[    0.270039] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.270144] AppArmor: AppArmor Filesystem Enabled
[    0.270171] pnp: PnP ACPI init
[    0.270525] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.270527] system 00:00: [io  0xffff] has been reserved
[    0.270528] system 00:00: [io  0xffff] has been reserved
[    0.270529] system 00:00: [io  0xffff] has been reserved
[    0.270530] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.270531] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.270536] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.270655] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.270695] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.270698] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.270725] pnp 00:03: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[    0.271649] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.271651] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.271652] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.271653] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.271654] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.271655] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.271656] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.271657] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.271658] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.271660] system 00:04: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.271663] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.271713] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.271714] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.271715] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.271716] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.271717] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.271718] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.271719] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.271722] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.272108] system 00:06: [io  0xff00-0xfffe] has been reserved
[    0.272111] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.273499] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.273501] system 00:07: [mem 0xfe02b000-0xfe02bfff] has been reserved
[    0.273504] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.274501] system 00:08: [io  0x0a00-0x0a07] has been reserved
[    0.274504] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.275425] pnp: PnP ACPI: found 9 devices
[    0.283253] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.283274] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.283286] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf5fffff]
[    0.283293] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.283294] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.283296] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.283296] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.283297] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.283298] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.283299] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.283300] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.283301] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.283302] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.283303] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.283304] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.283305] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.283305] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.283306] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.283307] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.283308] pci_bus 0000:00: resource 20 [mem 0x8f800000-0xdfffffff window]
[    0.283309] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[    0.283311] pci_bus 0000:01: resource 1 [mem 0xdf400000-0xdf5fffff]
[    0.283504] NET: Registered protocol family 2
[    0.283674] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.283777] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.283925] TCP: Hash tables configured (established 65536 bind 65536)
[    0.283953] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.283973] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.284047] NET: Registered protocol family 1
[    0.284061] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.284639] PCI: CLS 64 bytes, default 64
[    0.284669] Unpacking initramfs...
[    1.078843] Freeing initrd memory: 51988K
[    1.078988] DMAR: ACPI device "device:6d" under DMAR at fed91000 as 00:15.0
[    1.078991] DMAR: ACPI device "device:6e" under DMAR at fed91000 as 00:15.1
[    1.078993] DMAR: ACPI device "device:6f" under DMAR at fed91000 as 00:15.2
[    1.078996] DMAR: ACPI device "device:70" under DMAR at fed91000 as 00:15.3
[    1.078998] DMAR: ACPI device "device:71" under DMAR at fed91000 as 00:1e.0
[    1.079000] DMAR: ACPI device "device:72" under DMAR at fed91000 as 00:19.0
[    1.079017] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.079019] software IO TLB [mem 0x83630000-0x87630000] (64MB) mapped at [000000004efa9b6b-000000005a3153d7]
[    1.079224] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns
[    1.079354] Scanning for low memory corruption every 60 seconds
[    1.080102] Initialise system trusted keyrings
[    1.080110] Key type blacklist registered
[    1.080184] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.081152] zbud: loaded
[    1.081482] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.081660] fuse init (API version 7.26)
[    1.084517] Key type asymmetric registered
[    1.084518] Asymmetric key parser 'x509' registered
[    1.084545] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.084603] io scheduler noop registered
[    1.084604] io scheduler deadline registered
[    1.084640] io scheduler cfq registered (default)
[    1.085153] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[    1.085170] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[    1.085223] efifb: probing for efifb
[    1.085236] efifb: framebuffer at 0xc0000000, using 12160k, total 12160k
[    1.085237] efifb: mode is 2160x1440x32, linelength=8640, pages=1
[    1.085238] efifb: scrolling: redraw
[    1.085239] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.091025] Console: switching to colour frame buffer device 270x90
[    1.096704] fb0: EFI VGA frame buffer device
[    1.096711] intel_idle: MWAIT substates: 0x11142120
[    1.096712] intel_idle: v0.4.1 model 0x8E
[    1.096948] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.097087] ACPI: AC Adapter [ADP1] (on-line)
[    1.097141] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.097157] ACPI: Lid Switch [LID0]
[    1.098580] ACPI: Invalid active2 threshold
[    1.098968] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.099363] thermal LNXTHERM:00: registered as thermal_zone0
[    1.099363] ACPI: Thermal Zone [TZ00] (53 C)
[    1.100544] thermal LNXTHERM:01: registered as thermal_zone1
[    1.100545] ACPI: Thermal Zone [TZ01] (47 C)
[    1.100695] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.105989] Linux agpgart interface v0.103
[    1.107971] loop: module loaded
[    1.108263] libphy: Fixed MDIO Bus: probed
[    1.108264] tun: Universal TUN/TAP device driver, 1.6
[    1.108312] PPP generic driver version 2.4.2
[    1.108371] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.108373] ehci-pci: EHCI PCI platform driver
[    1.108382] ehci-platform: EHCI generic platform driver
[    1.108394] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.108395] ohci-pci: OHCI PCI platform driver
[    1.108401] ohci-platform: OHCI generic platform driver
[    1.108407] uhci_hcd: USB Universal Host Controller Interface driver
[    1.108605] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.108610] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.109732] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    1.109736] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.109890] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.109891] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.109892] usb usb1: Product: xHCI Host Controller
[    1.109893] usb usb1: Manufacturer: Linux 4.15.0-041500rc9-generic xhci-hcd
[    1.109894] usb usb1: SerialNumber: 0000:00:14.0
[    1.110007] hub 1-0:1.0: USB hub found
[    1.110026] hub 1-0:1.0: 12 ports detected
[    1.111012] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.111014] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.111048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.111049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.111049] usb usb2: Product: xHCI Host Controller
[    1.111050] usb usb2: Manufacturer: Linux 4.15.0-041500rc9-generic xhci-hcd
[    1.111051] usb usb2: SerialNumber: 0000:00:14.0
[    1.111157] hub 2-0:1.0: USB hub found
[    1.111172] hub 2-0:1.0: 6 ports detected
[    1.112778] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.112778] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.114726] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.114870] mousedev: PS/2 mouse device common for all mice
[    1.115426] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.115512] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.115517] i2c /dev entries driver
[    1.115562] device-mapper: uevent: version 1.0.3
[    1.115636] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.115639] intel_pstate: Intel P-state driver initializing
[    1.116059] intel_pstate: HWP enabled
[    1.116229] ledtrig-cpu: registered to indicate activity on CPUs
[    1.116231] EFI Variables Facility v0.08 2004-May-17
[    1.126579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    1.161432] intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002)
[    1.161638] NET: Registered protocol family 10
[    1.165262] Segment Routing with IPv6
[    1.165280] NET: Registered protocol family 17
[    1.165409] Key type dns_resolver registered
[    1.165842] RAS: Correctable Errors collector initialized.
[    1.165913] microcode: sig=0x806e9, pf=0x80, revision=0x80
[    1.166004] microcode: Microcode Update Driver: v2.2.
[    1.166011] sched_clock: Marking stable (1166002037, 0)->(1145362510, 20639527)
[    1.166356] registered taskstats version 1
[    1.166363] Loading compiled-in X.509 certificates
[    1.168224] Loaded X.509 cert 'Build time autogenerated kernel key: 23b93d546b1936f6416ab3acc17713eca1331f99'
[    1.168240] zswap: loaded using pool lzo/zbud
[    1.171061] Key type big_key registered
[    1.171064] Key type trusted registered
[    1.172371] Key type encrypted registered
[    1.172373] AppArmor: AppArmor sha1 policy hashing enabled
[    1.172376] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.172390] evm: HMAC attrs: 0x1
[    1.174914]   Magic number: 2:384:511
[    1.175174] rtc_cmos 00:01: setting system clock to 2018-01-23 02:31:05 UTC (1516674665)
[    1.175245] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.175245] EDD information not available.
[    1.217930] ACPI: Battery Slot [BAT1] (battery present)
[    1.219738] Freeing unused kernel memory: 2388K
[    1.219739] Write protecting the kernel read-only data: 20480k
[    1.220129] Freeing unused kernel memory: 2008K
[    1.222976] Freeing unused kernel memory: 1952K
[    1.227688] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.227688] x86/mm: Checking user space page tables
[    1.232328] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.295375] hidraw: raw HID events driver (C) Jiri Kosina
[    1.319886] sdhci: Secure Digital Host Controller Interface driver
[    1.319887] sdhci: Copyright(c) Pierre Ossman
[    1.352524] ahci 0000:00:17.0: version 3.0
[    1.352840] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[    1.352842] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.353199] scsi host0: ahci
[    1.353348] scsi host1: ahci
[    1.353394] ata1: DUMMY
[    1.353396] ata2: SATA max UDMA/133 abar m2048@0xdf646000 port 0xdf646180 irq 124
[    1.353440] sdhci-pci 0000:00:1e.6: SDHCI controller found [8086:9d2d] (rev 21)
[    1.353450] sdhci-pci 0000:00:1e.6: enabling device (0000 -> 0002)
[    1.354301] mmc0: SDHCI controller on PCI [0000:00:1e.6] using ADMA 64-bit
[    1.376116] [drm] Memory usable by graphics device = 4096M
[    1.376118] checking generic (c0000000 be0000) vs hw (c0000000 10000000)
[    1.376119] fb: switching to inteldrmfb from EFI VGA
[    1.376136] Console: switching to colour dummy device 80x25
[    1.376289] [drm] Replacing VGA console driver
[    1.382370] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.382371] [drm] Driver supports precise vblank timestamp query.
[    1.384195] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.384721] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[    1.392947] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    1.394986] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.395318] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    1.397763] fbcon: inteldrmfb (fb0) is primary device
[    1.448159] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.468429] usb 2-1: New USB device found, idVendor=04b4, idProduct=6500
[    1.468430] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.469062] hub 2-1:1.0: USB hub found
[    1.469258] hub 2-1:1.0: 2 ports detected
[    1.596117] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.664229] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.666433] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.666435] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.666436] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.667937] ata2.00: ATA-9: SAMSUNG MZNLN256HMHQ-000, MAV21K0Q, max UDMA/133
[    1.667939] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.669414] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.669416] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.669417] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.671422] ata2.00: configured for UDMA/133
[    1.671805] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG MZNLN256 1K0Q PQ: 0 ANSI: 5
[    1.672258] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.672418] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.672480] sd 1:0:0:0: [sda] Write Protect is off
[    1.672481] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.672555] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.674435]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[    1.675106] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.744379] usb 1-1: New USB device found, idVendor=04b4, idProduct=6502
[    1.744380] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.744713] hub 1-1:1.0: USB hub found
[    1.744742] hub 1-1:1.0: 2 ports detected
[    1.872245] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[    2.021282] usb 1-2: descriptor type invalid, skip
[    2.022858] usb 1-2: New USB device found, idVendor=04e8, idProduct=a00a
[    2.022859] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.031045] usbcore: registered new interface driver usbhid
[    2.031046] usbhid: USB HID core driver
[    2.032775] input: HID 04e8:a00a as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04E8:A00A.0001/input/input3
[    2.092518] hid-generic 0003:04E8:A00A.0001: input,hidraw0: USB HID v1.12 Keyboard [HID 04e8:a00a] on usb-0000:00:14.0-2/input1
[    2.092643] input: HID 04e8:a00a as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:04E8:A00A.0002/input/input4
[    2.100237] usb 1-1.1: new high-speed USB device number 4 using xhci_hcd
[    2.108486] clocksource: Switched to clocksource tsc
[    2.152472] hid-generic 0003:04E8:A00A.0002: input,hiddev0,hidraw1: USB HID v1.12 Device [HID 04e8:a00a] on usb-0000:00:14.0-2/input2
[    2.216959] usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=9271
[    2.216960] usb 1-1.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[    2.216961] usb 1-1.1: Product: USB2.0 WLAN
[    2.216961] usb 1-1.1: Manufacturer: ATHEROS
[    2.216962] usb 1-1.1: SerialNumber: 12345
[    2.344184] usb 1-3: new full-speed USB device number 5 using xhci_hcd
[    2.493418] usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300
[    2.493419] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.572176] usb 1-1.2: new full-speed USB device number 6 using xhci_hcd
[    2.598531] Console: switching to colour frame buffer device 270x90
[    2.619535] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.674841] usb 1-1.2: New USB device found, idVendor=04b4, idProduct=5210
[    2.674842] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.674843] usb 1-1.2: Product: Billboard Device
[    2.674843] usb 1-1.2: Manufacturer: Cypress Semiconductor
[    2.674844] usb 1-1.2: SerialNumber: 0001
[    2.677118] hid-generic 0003:04B4:5210.0004: hiddev1,hidraw2: USB HID v1.11 Device [Cypress Semiconductor Billboard Device] on usb-0000:00:14.0-1.2/input1
[    2.812310] [drm] RC6 on
[    2.865011] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    2.957580] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.050976] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    3.068078] systemd[1]: Detected architecture x86-64.
[    3.068234] systemd[1]: Set hostname to <pop-os>.
[    3.125111] systemd[1]: Listening on udev Kernel Socket.
[    3.125176] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.125200] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.125222] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.125260] systemd[1]: Listening on Network Service Netlink Socket.
[    3.125313] systemd[1]: Listening on Journal Audit Socket.
[    3.125351] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.145397] lp: driver loaded but no devices found
[    3.147970] ppdev: user-space parallel port driver
[    3.199980] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[    3.207915] systemd-journald[310]: Received request to flush runtime journal from PID 1
[    3.387588] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x201] vs fed40080 f80
[    3.387599] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x201] vs fed40080 f80
[    3.403545] i2c_hid i2c-SYNP1234:00: i2c-SYNP1234:00 supply vdd not found, using dummy regulator
[    3.425680] input: Intel Virtual Button driver as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input5
[    3.467881] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.473319] Bluetooth: Core ver 2.22
[    3.473332] NET: Registered protocol family 31
[    3.473332] Bluetooth: HCI device and connection manager initialized
[    3.473335] Bluetooth: HCI socket layer initialized
[    3.473337] Bluetooth: L2CAP socket layer initialized
[    3.473341] Bluetooth: SCO socket layer initialized
[    3.475066] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.477866] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.477868] cfg80211: failed to load regulatory.db
[    3.482593] usbcore: registered new interface driver btusb
[    3.496589] hid-multitouch 0003:04E8:A00A.0003: failed to fetch feature 8
[    3.507526] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[    3.507577] usbcore: registered new interface driver ath9k_htc
[    3.509012] hid-multitouch 0003:04E8:A00A.0003: failed to fetch feature 8
[    3.518090] input: HID 04e8:a00a Touchpad as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:04E8:A00A.0003/input/input7
[    3.518590] hid-multitouch 0003:04E8:A00A.0003: input,hiddev2,hidraw3: USB HID v1.12 Mouse [HID 04e8:a00a] on usb-0000:00:14.0-2/input0
[    3.548214] Adding 1953788k swap on /dev/sda8.  Priority:-2 extents:1 across:1953788k SSFS
[    3.665019] audit: type=1400 audit(1516674667.985:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=522 comm="apparmor_parser"
[    3.665401] audit: type=1400 audit(1516674667.985:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=527 comm="apparmor_parser"
[    3.699416] audit: type=1400 audit(1516674668.017:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=532 comm="apparmor_parser"
[    3.794099] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[    3.796586] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.796587] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.796588] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.796588] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.796589] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.796589] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.815761] AVX2 version of gcm_enc/dec engaged.
[    3.815762] AES CTR mode by8 optimization enabled
[    3.849640] audit: type=1400 audit(1516674668.169:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=534 comm="apparmor_parser"
[    3.906641] intel_rapl: Found RAPL domain package
[    3.906642] intel_rapl: Found RAPL domain core
[    3.906643] intel_rapl: Found RAPL domain uncore
[    3.906644] intel_rapl: Found RAPL domain dram
[    3.927168] audit: type=1400 audit(1516674668.245:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=525 comm="apparmor_parser"
[    3.927430] audit: type=1400 audit(1516674668.245:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=525 comm="apparmor_parser"
[    3.927656] audit: type=1400 audit(1516674668.245:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=525 comm="apparmor_parser"
[    3.927871] audit: type=1400 audit(1516674668.245:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=525 comm="apparmor_parser"
[    4.037276] audit: type=1400 audit(1516674668.357:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=566 comm="apparmor_parser"
[    4.050812] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits
[    4.283813] random: crng init done
[    4.323682] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4
[    4.323683] ath9k_htc 1-1.1:1.0: FW RMW support: On
[    4.323685] ath: EEPROM regdomain: 0x809c
[    4.323686] ath: EEPROM indicates we should expect a country code
[    4.323686] ath: doing EEPROM country->regdmn map search
[    4.323687] ath: country maps to regdmn code: 0x52
[    4.323688] ath: Country alpha2 being used: CN
[    4.323688] ath: Regpair used: 0x52
[    4.331607] ieee80211 phy0: Atheros AR9271 Rev:1
[    4.469632] input: SYNP1234:00 06CB:5810 as /devices/pci0000:00/INT3446:00/i2c_designware.0/i2c-6/i2c-SYNP1234:00/0018:06CB:5810.0005/input/input12
[    4.469955] hid-multitouch 0018:06CB:5810.0005: input,hidraw4: I2C HID v1.00 Device [SYNP1234:00 06CB:5810] on i2c-SYNP1234:00
[    4.480797] ath9k_htc 1-1.1:1.0 wlxc4e984ddc4e1: renamed from wlan0
[    4.487729] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    4.494950] idma64 idma64.2: Found Intel integrated DMA 64-bit
[    4.511363] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    4.512455] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    4.512773] idma64 idma64.3: Found Intel integrated DMA 64-bit
[    4.523246] i2c_hid i2c-WCOM0027:00: i2c-WCOM0027:00 supply vdd not found, using dummy regulator
[    5.592013] input: WCOM0027:00 2D1F:000B as /devices/pci0000:00/0000:00:15.1/i2c_designware.3/i2c-9/i2c-WCOM0027:00/0018:2D1F:000B.0006/input/input17
[    5.592114] hid-generic 0018:2D1F:000B.0006: input,hidraw5: I2C HID v1.00 Mouse [WCOM0027:00 2D1F:000B] on i2c-WCOM0027:00
[    5.596450] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    5.597155] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    5.601662] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    5.601731] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.602016] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.603760] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
[    5.604074] idma64 idma64.4: Found Intel integrated DMA 64-bit
[    5.613078] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
[    5.613358] idma64 idma64.5: Found Intel integrated DMA 64-bit
[    5.626601] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[    5.628052] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002)
[    5.629520] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[    5.629830] idma64 idma64.7: Found Intel integrated DMA 64-bit
[    5.633749] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    5.641080] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    5.641082] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.641083] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.641084] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.641085] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.641087] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    5.641088] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    5.656862] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    5.656913] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    5.656957] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    5.656998] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    5.657040] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    5.657086] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    5.756780] dw-apb-uart.6: ttyS4 at MMIO 0xdf645000 (irq = 32, base_baud = 115200) is a 16550A
[    5.841800] kauditd_printk_skb: 5 callbacks suppressed
[    5.841801] audit: type=1400 audit(1516674670.161:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=524 comm="apparmor_parser"
[    5.842089] audit: type=1400 audit(1516674670.161:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=524 comm="apparmor_parser"
[    5.842808] audit: type=1400 audit(1516674670.161:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=524 comm="apparmor_parser"
[    5.842980] audit: type=1400 audit(1516674670.161:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=524 comm="apparmor_parser"
[    5.843604] audit: type=1400 audit(1516674670.161:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=524 comm="apparmor_parser"
[    5.843765] audit: type=1400 audit(1516674670.161:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=524 comm="apparmor_parser"
[    5.872847] dw-apb-uart.7: ttyS5 at MMIO 0xdf644000 (irq = 20, base_baud = 115200) is a 16550A
[    5.921192] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[    5.921205] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[    5.925870] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 144d:c14f
[    5.925872] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
[    5.926302] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4-00022-QCARMSWPZ-2 api 6 features wowlan,ignore-otp crc32 4d458559
[    5.934731] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.934732] Bluetooth: BNEP filters: protocol multicast
[    5.934736] Bluetooth: BNEP socket layer initialized
[    5.992127] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=003e,subsystem-vendor=144d,subsystem-device=c14f from ath10k/QCA6174/hw3.0/board-2.bin
[    5.992531] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 ed5f849a
[    6.094182] IPv6: ADDRCONF(NETDEV_UP): wlxc4e984ddc4e1: link is not ready
[    6.278841] IPv6: ADDRCONF(NETDEV_UP): wlxc4e984ddc4e1: link is not ready
[    6.368383] IPv6: ADDRCONF(NETDEV_UP): wlxc4e984ddc4e1: link is not ready
[    6.567742] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
[    9.122509] wlxc4e984ddc4e1: authenticate with c0:4a:00:ee:cc:0d
[    9.374077] wlxc4e984ddc4e1: send auth to c0:4a:00:ee:cc:0d (try 1/3)
[    9.376634] wlxc4e984ddc4e1: authenticated
[    9.380080] wlxc4e984ddc4e1: associate with c0:4a:00:ee:cc:0d (try 1/3)
[    9.383762] wlxc4e984ddc4e1: RX AssocResp from c0:4a:00:ee:cc:0d (capab=0x431 status=0 aid=2)
[    9.392187] wlxc4e984ddc4e1: associated
[    9.407099] IPv6: ADDRCONF(NETDEV_CHANGE): wlxc4e984ddc4e1: link becomes ready
[    9.692021] ath10k_pci 0000:01:00.0: failed to ping firmware: -110
[    9.692024] ath10k_pci 0000:01:00.0: failed to reset rx filter: -110
[    9.773133] ath10k_pci 0000:01:00.0: could not init core (-110)
[    9.773164] ath10k_pci 0000:01:00.0: could not probe fw (-110)
[   16.989701] Could not find key with description: [e5cf74dd11880d1d]
[   16.989704] process_request_key_err: No key
[   16.989705] Could not find valid key in user session keyring for sig specified in mount option: [e5cf74dd11880d1d]
[   16.989706] One or more global auth toks could not properly register; rc = [-2]
[   16.989706] Error parsing options; rc = [-2]
[   18.191236] Bluetooth: RFCOMM TTY layer initialized
[   18.191246] Bluetooth: RFCOMM socket layer initialized
[   18.191252] Bluetooth: RFCOMM ver 1.11
[   19.148579] rfkill: input handler disabled
[  109.321248] Bluetooth: hci0: last event is not cmd complete (0x0f)
[  608.695345] usb 1-1.1: USB disconnect, device number 4
[  608.711176] wlxc4e984ddc4e1: deauthenticating from c0:4a:00:ee:cc:0d by local choice (Reason: 3=DEAUTH_LEAVING)
[  609.072213] ath: phy0: Chip reset failed
[  609.072217] ath: phy0: Unable to reset channel (2462 Mhz) reset status -22
[  609.072224] ath: phy0: Unable to set channel
[  609.082253] ath: phy0: Failed to wakeup in 500us
[  609.092299] ath: phy0: Failed to wakeup in 500us
[  609.102619] ath: phy0: Failed to wakeup in 500us
[  609.112620] ath: phy0: Failed to wakeup in 500us
[  609.367196] usb 1-1.1: ath9k_htc: USB layer deinitialized
[  609.599119] usb 1-1.1: new high-speed USB device number 7 using xhci_hcd
[  614.747287] usb 1-1.1: device descriptor read/64, error -110
[  614.972036] usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=9271
[  614.972041] usb 1-1.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[  614.972044] usb 1-1.1: Product: USB2.0 WLAN
[  614.972047] usb 1-1.1: Manufacturer: ATHEROS
[  614.972050] usb 1-1.1: SerialNumber: 12345
[  614.972977] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[  615.259422] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[  615.511234] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits
[  615.786489] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4
[  615.786490] ath9k_htc 1-1.1:1.0: FW RMW support: On
[  615.786491] ath: EEPROM regdomain: 0x809c
[  615.786492] ath: EEPROM indicates we should expect a country code
[  615.786492] ath: doing EEPROM country->regdmn map search
[  615.786493] ath: country maps to regdmn code: 0x52
[  615.786493] ath: Country alpha2 being used: CN
[  615.786494] ath: Regpair used: 0x52
[  615.791509] ieee80211 phy2: Atheros AR9271 Rev:1
[  615.795296] ath9k_htc 1-1.1:1.0 wlxc4e984ddc4e1: renamed from wlan0
[  615.818123] IPv6: ADDRCONF(NETDEV_UP): wlxc4e984ddc4e1: link is not ready
[  616.003128] IPv6: ADDRCONF(NETDEV_UP): wlxc4e984ddc4e1: link is not ready
[  616.046288] IPv6: ADDRCONF(NETDEV_UP): wlxc4e984ddc4e1: link is not ready
[  618.828399] wlxc4e984ddc4e1: authenticate with c0:4a:00:ee:cc:0d
[  619.096726] wlxc4e984ddc4e1: send auth to c0:4a:00:ee:cc:0d (try 1/3)
[  619.100246] wlxc4e984ddc4e1: authenticated
[  619.107141] wlxc4e984ddc4e1: associate with c0:4a:00:ee:cc:0d (try 1/3)
[  619.110891] wlxc4e984ddc4e1: RX AssocResp from c0:4a:00:ee:cc:0d (capab=0x431 status=0 aid=2)
[  619.119494] wlxc4e984ddc4e1: associated
[  619.126742] IPv6: ADDRCONF(NETDEV_CHANGE): wlxc4e984ddc4e1: link becomes ready
[  630.675223] usb 1-4: new full-speed USB device number 8 using xhci_hcd
[  630.824741] usb 1-4: New USB device found, idVendor=1050, idProduct=0116
[  630.824743] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  630.824744] usb 1-4: Product: Yubikey NEO OTP+U2F+CCID
[  630.824745] usb 1-4: Manufacturer: Yubico
[  630.827174] input: Yubico Yubikey NEO OTP+U2F+CCID as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:1050:0116.0007/input/input24
[  630.888473] hid-generic 0003:1050:0116.0007: input,hidraw6: USB HID v1.10 Keyboard [Yubico Yubikey NEO OTP+U2F+CCID] on usb-0000:00:14.0-4/input0
[  630.889639] hid-generic 0003:1050:0116.0008: hiddev3,hidraw7: USB HID v1.10 Device [Yubico Yubikey NEO OTP+U2F+CCID] on usb-0000:00:14.0-4/input1
[  638.817717] usb 1-4: USB disconnect, device number 8
[ 1069.682211] wlxc4e984ddc4e1: deauthenticating from c0:4a:00:ee:cc:0d by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1071.055354] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[ 1074.079355] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[ 1074.873483] PM: suspend entry (s2idle)
[ 1074.873486] PM: Syncing filesystems ... done.
[ 1074.878653] Freezing user space processes ... (elapsed 0.004 seconds) done.
[ 1074.882680] OOM killer disabled.
[ 1074.882681] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1074.884263] Suspending console(s) (use no_console_suspend to debug)
[ 1075.549206] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 1075.550684] sd 1:0:0:0: [sda] Stopping disk
[ 1088.917418] sd 1:0:0:0: [sda] Starting disk
[ 1088.918819] ACPI: button: The lid device is not compliant to SW_LID.
[ 1089.097642] usb 1-3: reset full-speed USB device number 5 using xhci_hcd
[ 1089.231378] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1089.233771] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1089.233772] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1089.233773] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1089.236190] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1089.236191] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1089.236192] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1089.237412] ata2.00: configured for UDMA/133
[ 1089.279123] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[ 1089.325233] usb 1-1.1: reset high-speed USB device number 7 using xhci_hcd
[ 1089.727452] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 1089.979307] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits
[ 1089.980940] usb 1-3:1.0: rebind failed: -517
[ 1089.980945] usb 1-3:1.1: rebind failed: -517
[ 1089.981395] OOM killer enabled.
[ 1089.981396] Restarting tasks ... 
[ 1089.996205] [drm] RC6 on
[ 1089.998721] done.
[ 1090.118763] PM: suspend exit
[ 1090.132104] IPv6: ADDRCONF(NETDEV_UP): wlxc4e984ddc4e1: link is not ready
[ 1090.355710] IPv6: ADDRCONF(NETDEV_UP): wlxc4e984ddc4e1: link is not ready
[ 1090.400533] IPv6: ADDRCONF(NETDEV_UP): wlxc4e984ddc4e1: link is not ready
[ 1093.162133] wlxc4e984ddc4e1: authenticate with c0:4a:00:ee:cc:0d
[ 1093.423800] wlxc4e984ddc4e1: send auth to c0:4a:00:ee:cc:0d (try 1/3)
[ 1093.426605] wlxc4e984ddc4e1: authenticated
[ 1093.429102] wlxc4e984ddc4e1: associate with c0:4a:00:ee:cc:0d (try 1/3)
[ 1093.432854] wlxc4e984ddc4e1: RX AssocResp from c0:4a:00:ee:cc:0d (capab=0x431 status=0 aid=2)
[ 1093.441567] wlxc4e984ddc4e1: associated
[ 1093.448523] IPv6: ADDRCONF(NETDEV_CHANGE): wlxc4e984ddc4e1: link becomes ready

default partitioning with linux and swap added

/dev/sda1       2048    206847    204800   100M EFI System
/dev/sda2     206848    468991    262144   128M Microsoft reserved
/dev/sda3     468992 393043210 392574219 187.2G Microsoft basic data
/dev/sda4  471169024 472193023   1024000   500M Windows recovery environment
/dev/sda5  472193024 498020351  25827328  12.3G Windows recovery environment
/dev/sda6  498020352 500117503   2097152     1G Windows recovery environment
/dev/sda7  393043968 467261439  74217472  35.4G Linux filesystem
/dev/sda8  467261440 471169023   3907584   1.9G Linux swap

Also, information from the previous device's page (Samsung Galaxy TabPro S) might possibly help / apply to this device as well. http://www.linlap.com/samsung_galaxy_tabpro_s


Discussion

Enter your comment. Wiki syntax is allowed:
If you can't read the letters on the image, download this .wav file to get them read to you.
 
samsung_galaxy_book_12.txt · Last modified: 2018/01/23 03:42 by mazz
Contact Us Sister Sites Privacy Policy Terms of Use
Copyright © 2006-2013 Linlap.com and other authors