Popular Guides
View more guides at Linux Wiki Guides
This is a guide to running Linux with the Toshiba Satellite P25 laptop.
This guide is intended to provide you details on how well this laptop works with Linux and which modules you need to configure. For details on how to actually install and configure the required modules have a look at our guides section for distribution specific instructions.
If you would like to edit this page please first view our Editing Guidelines.
Name | Toshiba Satellite P25 |
Processor | Intel Pentium4 3.0GHz |
Screen | 17“ WXGA+ |
RAM | 1GB |
HDD | 80GB |
Optical Drive | DVD-RW |
Graphics | NVIDIA GeForce4 FX Go5700 |
Network | 10/100 Ethernet, Atheros 802.11g Wireless |
Other | 4 x USB2.0, 1 x Firewire |
Device | Compatibility | Comments |
---|---|---|
Processor | Yes | |
Screen | Yes | |
Optical Drive | Yes | |
Graphics | Yes | |
Sound | Yes | Use the snd-intel8x0 module |
Ethernet | Yes | |
Wireless | Yes | Use the Madwifi module |
56K Modem | Not Tested | |
USB | Yes | |
Firewire | Not Tested | |
Card Reader | Not Tested | |
PCMCIA | Not Tested |
For the graphics chip you can use either the open source 'nv' module or NVIDIA's proprietary 'nvidia' module. For installation instructions, you can view our Configuring a nVidia graphics chip guide. For 3D support, you will need the proprietary module.
There were no problems in getting this laptop working when used with an up to date Linux distribution. It is recommended to use a Linux distribution with kernel version 2.6.16 or greater, such as Fedora Core 5 or Ubuntu 6.06.
Discussion